Electrical detection
Electrical detection > MTAGX0669FHUA-2
⁄

MTAGX0669FHUA-2

Voltage detector Multi Range MTAG X
Technical sheet
Pulse 32 Darkbg
/ Areas of activity
Electrical distribution
Industry
Production
Substation
Electric traction
Transport
/ Standards
Penta Bulletpoint IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C
Penta Bulletpoint CE compliante
/ Use
This Go NoGo Contact voltage detector is designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit of an HV distribution system, It’s two or three operating ranges are calibrated according to IEC recommendations between 1 kV and 69 kV:

• The device will detect any nominal voltage in contact with the part of the installation to be tested on overhead lines and substations.
• It will not indicate voltage presence when detecting induced voltages in order to allow grounding operations.
Advantages
Penta Bulletpoint This multi range detector acts as up to 3 voltage detectors with 3 separated ranges: lower range, median range and upper range.
Penta Bulletpoint Loud indication sound (the 100 dB at 1m)
Penta Bulletpoint The visual indication is visible in all positions
Penta Bulletpoint Direct access to the battery and sealed electronics compartment (IP65)
Penta Bulletpoint Permanent standby status with automatic wake up function
Penta Bulletpoint The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
Penta Bulletpoint Self test OK the OK status (ready for use) of the device is indicated by a GREEN light
Penta Bulletpoint The self test checks all the circuits, the reference detection level and the battery voltage
Penta Bulletpoint The “ready for use” state is indicated by the green indication for 2 minutes
Penta Bulletpoint A low battery level is indicated by an ORANGE light
Penta Bulletpoint Removable and interchangeable stick end fitting
/ Technical specifications
Penta Bulletpoint Power type : Alternating power
Penta Bulletpoint Network frequency (Hz) : 50/60
Penta Bulletpoint 1st voltage range (HV) : 6-20
Penta Bulletpoint 2nd voltage range (HV) : 30-69
Penta Bulletpoint Condition of use : Inside, Outside
Penta Bulletpoint Temperature of use (C°) : -25...+55
Penta Bulletpoint Hymidity (Max) (%) : 96
Penta Bulletpoint Battery type : 9V battery (x1)
Penta Bulletpoint Connector type : Universal (U), APV
Penta Bulletpoint Electrode type (mm) : V56
Penta Bulletpoint Case material : Polycarbonate
Penta Bulletpoint Color : Yellow
Penta Bulletpoint Measurement (mm) : 280 x 59 x 59
Penta Bulletpoint Weight (kg) : 0,390
Penta Bulletpoint Notice : PACK F (FR/GB/DE/ES/PT/PL)
Penta Bulletpoint Packaging : Soft case with conductive lining for EMC protection
Penta Bulletpoint Acoustic sound level (dB) : 100 dB