Electrical detection
Electrical detection > TAPISNIT
TAPISNIT
Nitrile mat
Technical sheet
/ Use
To protect tools - keep items clean at the trench's edge.
/ Technical specifications

Elastomeric material : nitrile.

Density : 1.35 ± 0.1 kg/dm3

DIDC hardness : 65 ± 7 degrees

Breaking strength (Rr) : ≥ 5 Mpa

Elongation at break (Ar) : ≥ 200 %

Operating temperature : -20 / +100°C

Conditions of use (only for TAPISNIT.140.300) : according to the requirements of the ERDF Engineering department ("Direction Réseau - Département Fiabilité Ingénierie d'ERDF"), if working in the vicinity of an accessory :

- Either cover the accessory in the trench with 5 cm of sand, then place the nitrile rubber mat over it all,

- Or position 2 nitrile mats overlapping over the accessory (1 metre overlap of the two mats).