Technical sheet
/ LW09-01
Two-flange saddles
See online technical sheet
/ Use
The two-flange saddle, combined with ball thrust bearings and screw or hydraulic cylinders, is used at the end of a tower arm to suspend an insulating chain.
If the saddle is in danger of slipping or tilting, secure it to the tower using the eyebolts on the side of the top flange.
The saddle consists of :
- an upper flange fitted at each end with a swivel-mounted ball-joint support, enabling the fitting of ball-bearings for screw jacks or hydraulic cylinders. One side of the upper flange is fitted with two eyebolts,
- a fixed (for type 1) or swiveling (for types 2 and 3) lower flange connected to the upper flange by two connecting rods,
- two removable support legs.
If the saddle is in danger of slipping or tilting, secure it to the tower using the eyebolts on the side of the top flange.
The saddle consists of :
- an upper flange fitted at each end with a swivel-mounted ball-joint support, enabling the fitting of ball-bearings for screw jacks or hydraulic cylinders. One side of the upper flange is fitted with two eyebolts,
- a fixed (for type 1) or swiveling (for types 2 and 3) lower flange connected to the upper flange by two connecting rods,
- two removable support legs.
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Pulling undwinding devices
:
Pulling devices
Product type
:
Saddle
Operating voltage (V)
:
HTB (> 50 000 V)
Support material
:
Metal
Technical sheet
| Product reference | CMU (daN) | Centre distance | Cote A | Cote B | Lenght | Width | Height | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| LW09-01-GM | 6000 | 1080 mm | 205 | 270 | 1220 mm | 245 mm | 520 mm | 31 |
| LW09-01-PM | 4500 | 570 mm | 205. | 270. | 720 mm | 245. mm | 520. mm | 25 |