Technical sheet
/ LW09-07
Screw jack and clevis
See online technical sheet
/ Use
Attached to the end of a clevis pin tie-rod, the clevis screw jack is fitted with its own ball bearing, which can be operated with a wrench, to take up the mechanical tension of a suspension or anchor chain, with a view to replacing it. The choice of ball bearings depends on the type of support (saddle with two spreader plates).
Technical sheet
/ Technical specifications
Pulling undwinding devices
:
Pulling devices
Operating voltage (V)
:
HTB (> 50 000 V)
Technical sheet
| Product reference | CMU (daN) | Lenght | Weight (kg) | Stroke (mm) | Axe diameter (mm) |
|---|---|---|---|---|---|
| LW09-07-2500-50 | 2500 | 500 mm | 1,7 | 300 | 19,4 |
| LW09-07-2500-75 | 2500 | 750 mm | 2,2 | 550 | 19,4 |
| LW09-07-2500-100 | 2500 | 1000 mm | 2,6 | 800 | 19,4 |
| LW09-07-2500-130 | 2500 | 1300 mm | 3,1 | 1100 | 19,4 |
| LW09-07-5000-50 | 5000 | 500 mm | 2,5 | 300 | 20 |
| LW09-07-5000-75 | 5000 | 700 mm | 2,8 | 500 | 20 |
| LW09-07-5000-100 | 5000 | 1000 mm | 3,4 | 800 | 20 |
| LW09-07-5000-130 | 5000 | 1300 mm | 4,1 | 1100 | 20 |
| LW09-07-6000-67 | 6000 | 670 mm | 3,5 | 500 | 24 |