Technical sheet
/ LW11-37
Gauge for transmission conductors (Gauge in metric)
See online technical sheet
/ Standards
IEC 60832-2
/ Use
The gauge is used to measure the diameter of the conductors and to deduce, if necessary, their cross-section.
A table engraved in the body of the gauge gives the correspondence between diameter and cross-section for the most common conductors.
Universal tip and slider, made of corrosion-protected metal. Graduated body made of synthetic material.
Direct reading scale for conductor diameters between 6 and 60 mm (0,24’’ to 2,36’’).
A table engraved in the body of the gauge gives the correspondence between diameter and cross-section for the most common conductors.
Universal tip and slider, made of corrosion-protected metal. Graduated body made of synthetic material.
Direct reading scale for conductor diameters between 6 and 60 mm (0,24’’ to 2,36’’).
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Dimensions (mm)
:
270x190x15mm
Pole kind
:
Pole accessories
Operating voltage (V)
:
HTB (> 50 000 V)
Pole adaptators
:
Universal (U)
Accessory weight (kg)
:
0,5
Overall dimensions (Inch)
:
10,6x7,5x0,6 in.
Accessory weights (lbs)
:
1,1
/ Accessories
| Reference | Designation | |
|---|---|---|
|
LW03-06 | Insulating universal stick |