Technical sheet
/ LW07-09-400
3-Hooks tower type saddle
See online technical sheet
/ Use
Used to support conductor support sticks on towers.
This saddle is securely fastened to the angle-iron tower leg by three hooks tightened by wing nuts.
A clevis which bolts through the pivot lug permits rope blocks to be fastenedThis allows rope blocks to pivot with the conductor support stick.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”) .
When the saddle is to be used on angle-iron tower legs larger than 100 mm (4”), the fixing rods must be equipped with appropriates hooks and washers.
This saddle is securely fastened to the angle-iron tower leg by three hooks tightened by wing nuts.
A clevis which bolts through the pivot lug permits rope blocks to be fastenedThis allows rope blocks to pivot with the conductor support stick.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”) .
When the saddle is to be used on angle-iron tower legs larger than 100 mm (4”), the fixing rods must be equipped with appropriates hooks and washers.
Technical sheet
/ Technical specifications
Product type
:
Selle
Operating voltage (V)
:
HTA (1 000 V to 50 000 V), HTB (> 50 000 V)
Lenght (mm)
:
550
Width (mm)
:
425
Height (mm)
:
135.
Pole-climbers max capacity (mm)
:
40 à 315
Weight (kg)
:
4
Length of fixing rod(s) (mm)
:
400