Technical sheet
/ PAC1050SC
Earthing clamp from the ground using an insulating rope
See online technical sheet
/ Standards
CEI 61230
/ Use
The clamp is attached and detached from the ground by means of an insulating rope passed over the conductor.
The clamp is hoisted onto the conductor by pulling on the 1st rope. The clamp is released by pulling on the 2nd rope.
The rope can be passed over the conductor using an insulating pole fitted with the coil holder adapter (PBU) and insulating coil, or the DROPOVER.
The clamp is hoisted onto the conductor by pulling on the 1st rope. The clamp is released by pulling on the 2nd rope.
The rope can be passed over the conductor using an insulating pole fitted with the coil holder adapter (PBU) and insulating coil, or the DROPOVER.
/ Advantages
Automatic spring clamp, no manual tightening required
Low weight constraints
High clamping capacity
Fast and easy to use
System that facilitates the installation of malt
/ Areas of activity
Electrical distribution
Civil security
Transport
Technical sheet
/ Technical specifications
Product kind
:
Clamps
Clamp material
:
Aluminium
Clamp tightenning (mm)
:
Ø10 à 50 mm
Conductor type
:
Round
Operating voltage (V)
:
HTB (> 50 000 V)
Field of use (environment)
:
In line (aerial)
:
Isolated
Way of access
:
From the floor
Short-circuit intensity kA/1s
:
31,5
Measurement
:
220x220x80mm
Weight (kg)
:
1,4
