Technical sheet
/ LW07-13
Pole clamp
See online technical sheet
/ Standards
IEC 61236
/ Use
Attached to a pole type saddle with an extension if additional clearance is required. The pole clamp is used to receive a conductor support stick for the purpose of maneuvering a conductor.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”).
It is recommended to check the tightening torque of the wingnut using a torque wrench and the wing nut socket (sold separately).
Metal sleeve made of :
• 2 shells with stainless steel fittings
• A wing nut with an anti-friction washer
Recommended tightening torque on the wing nut: 17 N.m / 12.5 lb.ft (wing nut socket sold separately)
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”).
It is recommended to check the tightening torque of the wingnut using a torque wrench and the wing nut socket (sold separately).
Metal sleeve made of :
• 2 shells with stainless steel fittings
• A wing nut with an anti-friction washer
Recommended tightening torque on the wing nut: 17 N.m / 12.5 lb.ft (wing nut socket sold separately)
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Operating voltage (V)
:
HTA (1 000 V to 50 000 V), HTB (> 50 000 V)
Technical sheet
| Product reference | Maximum working load (MWL) | Lenght | Width | Height | Pole-climbers max capacity (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| LW07-13-39 | Dans l'axe de la perche : 130daN Perpendiculaire à l'axe de la perche : 180daN | 100 mm | 125 mm | 180 mm | Ø39 ±1 | 0,8 |
| LW07-13-64 | Dans l'axe de la perche : 220daN Perpendiculaire à l'axe de la perche : 310daN | 100. mm | 155 mm | 195 mm | Ø64 ±1 | 1,15 |