Technical sheet
/ LW04-07-CLE
Tension puller
See online technical sheet
/ Use
Equipped with a hook, the tension puller, used in association with a come along clamp, is used to take up the mechanical tension of a conductor by means of the screw jack.
It allows, the replacement of an anchor chain whose insulators have a diameter inferior of 240 mm.
The screw jack is operated by means of 24x27mm open-end ratchet.
It allows, the replacement of an anchor chain whose insulators have a diameter inferior of 240 mm.
The screw jack is operated by means of 24x27mm open-end ratchet.
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Pulling undwinding devices
:
Pulling devices
Product type
:
Tirant
Operating voltage (V)
:
HTA (1 000 V to 50 000 V)
Lenght (mm)
:
295
Width (mm)
:
47
Height (mm)
:
60
Weight (kg)
:
1,2
CMU (daN)
:
1100
Maximum conductor cross-section
:
148 mm²
Ø of tube(s)
:
39 mm