Technical sheet
/ LW08-30
Jumper holder
See online technical sheet
/ Use
The jumper holder is used to handle and guide a jumper when installing or removing it.
The jumper holder allows the jumper to remain in a horizontal position.
It can be operated from the ground using insulating ropes.
The jumper holder consists of :
• An Insulating tube, fiberglass over the foam core ø 39 mm (1 1/2” length 3.60m (11 ft. 9 in.)
• Two steel forks, each with :
• Two adjustable spindles in position,
• Jumper clamp,
• A mooring bracket for insulating rope,
• Three pole clamp ø 39mm (2”) in light alloy,
• Two clamps made of corrosion protected steel,
• Two light alloy pulleys with steel clamps protected against corrosion.
The jumper holder allows the jumper to remain in a horizontal position.
It can be operated from the ground using insulating ropes.
The jumper holder consists of :
• An Insulating tube, fiberglass over the foam core ø 39 mm (1 1/2” length 3.60m (11 ft. 9 in.)
• Two steel forks, each with :
• Two adjustable spindles in position,
• Jumper clamp,
• A mooring bracket for insulating rope,
• Three pole clamp ø 39mm (2”) in light alloy,
• Two clamps made of corrosion protected steel,
• Two light alloy pulleys with steel clamps protected against corrosion.
/ Areas of activity
Transport
Technical sheet
/ Technical specifications
Operating voltage (V)
:
HTB
/ Associated products
| Reference | Designation | |
|---|---|---|
|
LW08-04-14-100 | Insulating rope |
Technical sheet
| Product reference | Designation | Weight (kg) | Lenght | Width | Height |
|---|---|---|---|---|---|
| LW08-30-FOU | Fork | - | - | - | - |
| LW08-30-EPB | Vise for shoulder strap | 1,9 | 255 mm | 215 mm | 105 mm |
| LW08-30-PEF | Pulley with clamp attachment | 3,5 | 385 mm | 130 mm | 85 mm |
| LW08-30-TS | Support tube | 1,8 | 3600 mm | 45 mm | 45 mm |