Voltage detector for Capacitive Test Point of elbow connector MTAG BC
See online technical sheet
/ Standards
Complies with EDF-SPS technical specification n° 42
CE compliante
/ Use
These voltage detectors are designed for “proving dead”, making sure that nominal voltage is actually absent on capacitive test point of elbow connector (no-voltage verification): • The device will detect any nominal voltage on capacitive test point. • It will avoid detecting most induced voltages in order to allow grounding operations.
/ Advantages
Loud indication sound (the 100 dB at 1m)
The visual indication is visible in all positions
Direct access to the battery and sealed electronics compartment (IP65)
Permanent standby status with automatic wake up function
The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
Self test OK the OK status (ready for use) of the device is indicated by a GREEN light
The self test checks all the circuits, the reference detection level and the battery voltage
The “ready for use” state is indicated by the green indication for 2 minutes
A low battery level is indicated by an ORANGE light
/ Areas of activity
Electrical distribution
Industry
Substation
Technical sheet
/ Technical specifications
Power type
:
Alternating power
Network frequency (Hz)
:
50/60
Condition of use
:
Inside, Outside
Temperature of use (C°)
:
-25...+55
Hymidity (Max) (%)
:
96
Battery type
:
9V battery (x1)
Electrode type (mm)
:
Angled
Case material
:
Polycarbonate
Color
:
Orange
Measurement (mm)
:
260 x 100
Weight (kg)
:
0,450
Acoustic sound level (dB)
:
100 dB
Packaging
:
Soft case with conductive lining for EMC protection