Voltage Detector for voltage capacitive test points TAG200BC
See online technical sheet
/ Standards
Complies with EDF-SPS technical specification n° 42
CE compliante
/ Use
• TAG200BC is designed to check presence or absence of nominal voltage on the voltage capacitive test points of elbows and cable terminals defined in standard NF C 33-051 of electrical installations with a nominal voltage between 3 kV and 36 kV.
• Its insulated and elbowed electrode allow removing, handling and re-placement the insulating caps on voltage capacitive test points.
• The elbow electrode has an "universal" end fitting for fixing and handling the detector at the end of an insulating stick adapted to the nominal voltage of the installation to be tested.
electrical-detection / TAG200BC 📁 / penta-catchprase-complement
/ Advantages
Validation de l'autotest et état de veille indiqués par un voyant vert
The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
The self test checks all the circuits, the reference detection level and the battery voltage
/ Areas of activity
Electrical distribution
Industry
Substation
Electric traction
Technical sheet
/ Technical specifications
Power type
:
Alternating power
Network frequency (Hz)
:
50/60
Condition of use
:
Inside, Outside
Temperature of use (C°)
:
-20...+50
Hymidity (Max) (%)
:
96
Battery type
:
9V battery (x1)
Connector type
:
Universal (U)
Electrode type (mm)
:
Angled
Case material
:
Polycarbonate
Color
:
Yellow
Measurement (mm)
:
275 x 56 x 56
Weight (kg)
:
0,45
Packaging
:
Soft case with conductive lining for EMC protection