Technical sheet
/ LW07-14
Flat pole clamp
See online technical sheet
/ Standards
IEC 61236
/ Use
Directly attached to the saddle, this clamps brings the conductor support stick closer to the support when required for certains interventions.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”).
It is recommended to check the tightening torque of the wingnut using a torque wrench and the wing nut socket (sold separately).
Corrosion protected metal sleeve consisting of :
• 2 shells with stainless steel fittings
• A wing nut with an anti-friction washer
Recommended tightening torque on the wing nut: 17 N.m / 12.5 lb.ft (wing nut socket sold separately)
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”).
It is recommended to check the tightening torque of the wingnut using a torque wrench and the wing nut socket (sold separately).
Corrosion protected metal sleeve consisting of :
• 2 shells with stainless steel fittings
• A wing nut with an anti-friction washer
Recommended tightening torque on the wing nut: 17 N.m / 12.5 lb.ft (wing nut socket sold separately)
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Operating voltage (V)
:
HTA, HTB
/ Associated products
| Reference | Designation | |
|---|---|---|
|
LW08-38 | Forked driver support |
|
LW04-01 | Conductor support stick |
Technical sheet
| Product reference | Maximum working load (MWL) | Lenght | Width | Height | Pole-climbers max capacity (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| LW07-14-39 | Dans l'axe de la perche : 130daN Perpendiculaire à l'axe de la perche : 180daN | 150 mm | 130 mm | 100 mm | Ø39 ±1 | 0,9 |
| LW07-14-64 | Dans l'axe de la perche : 220daN Perpendiculaire à l'axe de la perche : 310daN | 165 mm | 155 mm | 100. mm | Ø64 ±1 | 1,3 |