Technical sheet
/ LW11-55
U-Ball fitting
See online technical sheet
/ Standards
IEC 60832-2
/ Use
The U ball end is used, together with a universal pole, to handle tools equipped with a ball attachment. It can also be used to position line equipment with appropriate clamps to grip the stirrup.
It is composed of :
• A stainless-steel body designed to hold the sphere.
• A brass screwing pin to adjust the clamping on the ball. At one end of the shaft there is a universal adapter to fit the tool to the universal pole and at the other end there is the stainless-steel movable jaw which is held in the body. This part presses on the ball to tighten it.
It is composed of :
• A stainless-steel body designed to hold the sphere.
• A brass screwing pin to adjust the clamping on the ball. At one end of the shaft there is a universal adapter to fit the tool to the universal pole and at the other end there is the stainless-steel movable jaw which is held in the body. This part presses on the ball to tighten it.
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Pole kind
:
Pole accessories
Operating voltage (V)
:
HTA (1 000 V to 50 000 V)
Pole adaptators
:
Universal (U)
Technical sheet
| Product reference | Dimensions (mm) | Accessory weight (kg) | Overall dimensions (Inch) | Accessory weights (lbs) | Clamping capacity (mm) | Clamping capacity (Inch) |
|---|---|---|---|---|---|---|
| LW11-55-24 | 105x35x35mm | 0,3 | 4,1x1,3x0,2 in. | 0,7 | 24 | 0,94" |
| LW11-55-30 | 125x45x45mm | 0,5 | 4,9x1,7x0,35 in. | 1,1 | 30 | 1,18" |