Technical sheet
/ LW04-07
Tension puller
See online technical sheet
/ Use
Equipped with a hook, the tension puller, used in association with a come along clamp, is used to take up the mechanical tension of a conductor by means of the screw jack.
It allows, the replacement of an anchor chain whose insulators have a diameter inferior of 240 mm.
The screw jack is operated by means of 24x27mm open-end ratchet.
It allows, the replacement of an anchor chain whose insulators have a diameter inferior of 240 mm.
The screw jack is operated by means of 24x27mm open-end ratchet.
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Pulling undwinding devices
:
Pulling devices
Product type
:
Tirant
Operating voltage (V)
:
HTA (1 000 V to 50 000 V)
CMU (daN)
:
1100
Maximum conductor cross-section
:
148 mm²
Ø of tube(s)
:
39 mm
/ Accessories
| Reference | Designation | |
|---|---|---|
|
LW04-09-CR1 | Hook for extension model 1 |
|
LW04-09-CR2 | Hook for extension model 2 |
|
LW04-09-CO | Hook for OL 40 |
|
LW04-09-CN | Normal hook |
|
LW04-09-CPF | Fine hook |
|
LW04-09-MA | Automatic shackle |
|
LW08-11-PM | Spring cable clamp Small model |
|
LW08-11-GM | Spring cable clamp Large model |
|
LW12-09 | Mechanical tension measuring device |
Technical sheet
| Product reference | Lenght | Width | Height | Weight (kg) |
|---|---|---|---|---|
| LW04-07 | 1115 mm | 355 mm | 105 mm | 7 |
| LW04-07-DM1 | 125 mm | 110 mm | 25 mm | 0,3 |
| LW04-07-CI | 370 mm | 170 mm | 85 mm | 0,5 |
| LW04-07-DM2 | 405 mm | 95 mm | 30 mm | 0,25 |
| LW04-07-CLE | 295 mm | 47 mm | 60 mm | 1,2 |