Technical sheet
/ LW07-10
4-Hooks tower type saddle
See online technical sheet
/ Use
Used to support conductor support sticks on towers.
This saddle is securely fastened to the angle-iron tower leg by three hooks tightened by wing nuts.
A clevis which bolts through the pivot lug permits rope blocks to be fastened.
This allows rope blocks to pivot with the conductor support sticks.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”) .
When the saddle is to be used on angle-iron tower legs larger than 100 mm (4”), the fixing rods must be equipped with appropriates hooks and washers.
This saddle is securely fastened to the angle-iron tower leg by three hooks tightened by wing nuts.
A clevis which bolts through the pivot lug permits rope blocks to be fastened.
This allows rope blocks to pivot with the conductor support sticks.
The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”) .
When the saddle is to be used on angle-iron tower legs larger than 100 mm (4”), the fixing rods must be equipped with appropriates hooks and washers.
/ Areas of activity
Electrical distribution
Transport
Technical sheet
/ Technical specifications
Product type
:
Selle
Operating voltage (V)
:
HTB (> 50 000 V)
Lenght (mm)
:
600
Width (mm)
:
300
Height (mm)
:
170
Pole-climbers max capacity (mm)
:
70 à 190
Weight (kg)
:
7,4
Maximum working load (MWL)
:
Avec rallonge de selle : 320daN Sans rallonge de selle : 450daN
Technical sheet
| Product reference |
|---|
| LW07-10-PM |
| LW07-10-GM |