IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C
Conformidad CE
/ Uso
Estos detectores de tensión están diseñados para verificar que una tensión nominal está efectivamente ausente de un circuito en un sistema de AT entre 1 kV y 69 kV (Verificación de Ausencia de Tensión) : - El aparato debe detectar cualquier tensión nominal presente en una red o en una subestación. - Evita detectar las tensiones inducidas para poder realizar las operaciones de puesta a tierra.
/ Ventajas
Loud indication sound (the 100 dB at 1m)
The visual indication is visible in all positions
Direct access to the battery and sealed electronics compartment (IP65)
Permanent standby status with automatic wake up function
The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
Self test OK the OK status (ready for use) of the device is indicated by a GREEN light
The self test checks all the circuits, the reference detection level and the battery voltage
The “ready for use” state is indicated by the green indication for 2 minutes
A low battery level is indicated by an ORANGE light
Removable and interchangeable stick end fitting
/ Areas de actividad
Distribución de electricidad
Industria
Generación
Sub-estaciones
Tracción eléctrica
Transporte
Ficha técnica
/ Características
Power type
:
Alternating power
Network frequency (Hz)
:
50/60
Rango de tensión (kV)
:
20-69
Condition of use
:
Inside, Outside
Temperatura de funcionamiento (C°)
:
-25...+55
Humedad (máx.) (%)
:
96
Battery type
:
9V battery (x1)
Connector type
:
Universal (U), APV
Electrode type (mm)
:
V56
Material de la carcasa
:
Policarbonato
Color
:
Yellow
Measurement (mm)
:
280 x 59 x 59
Weight (kg)
:
0.390
Nivel de señal acústica
:
100 dB
Notice
:
PACK F (FR/GB/DE/ES/PT/PL)
Packaging
:
Soft case with conductive lining for EMC protection
Acceso pila
Indicación de presencia de una tensión / Sin indicación de voltaje
Fonda metalizada Con protección electromagnética CEM