Attached to a pole type saddle with an extension if additional clearance is required. The pole clamp is used to receive a conductor support stick for the purpose of maneuvering a conductor. The use of a rope block is recommended for the maneuvering of the support stick Ø 64 mm (2 ½”). It is recommended to check the tightening torque of the wingnut using a torque wrench and the wing nut socket (sold separately).
Metal sleeve made of : • 2 shells with stainless steel fittings • A wing nut with an anti-friction washer Recommended tightening torque on the wing nut: 17 N.m / 12.5 lb.ft (wing nut socket sold separately)
/ Technical specifications
Operating voltage (V)
:
HTA (1 000 V to 50 000 V), HTB (> 50 000 V)
Product reference
Lenght
Width
Height
Pole-climbers max capacity (mm)
Weight (kg)
Maximum working load (MWL)
Technical sheet
Quantity
LW07-13-39
100 mm
125 mm
180 mm
Ø39 ±1
0,8
Dans l'axe de la perche : 130daN Perpendiculaire à l'axe de la perche : 180daN
LW07-13-64
100. mm
155 mm
195 mm
Ø64 ±1
1,15
Dans l'axe de la perche : 220daN Perpendiculaire à l'axe de la perche : 310daN
IEC 61236
Technical sheet
en
en-GB
fr
es
Electrical distribution
Transport