Technical sheet
/ LW08-38
Forked driver support
See online technical sheet
/ Use
Attached to the tube of an auxiliary arm, with the fork opening pointing upwards, the fork conductor support is used to temporarily hold a conductor.
The conductor must always rest at the bottom of the fork groove.
Metal fork driver support consisting of :
- fork with locking latch,
- a 64 mm diameter clamp with an anti-friction washer integrated into the wing nut, and a stainless steel fork.
The conductor must always rest at the bottom of the fork groove.
Metal fork driver support consisting of :
- fork with locking latch,
- a 64 mm diameter clamp with an anti-friction washer integrated into the wing nut, and a stainless steel fork.
Technical sheet
/ Technical specifications
Operating voltage (V)
:
HTA (1 000 V to 50 000 V)
Lenght (mm)
:
350
Width (mm)
:
200
Height (mm)
:
100
Tightening capacity (mm)
:
Ø27 max
CMU (daN)
:
Verticale : 250 daN Horizontale : 150 daN
/ Accessories
| Reference | Designation | |
|---|---|---|
|
LW07-14 | Flat pole clamp |
|
LW07-16 | Chain binder |
|
LW06-09 | Auxiliary arm |